2036 Aluminum pipe

2036 Aluminum pipe

<strong>2036 aluminum </strong>this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good. <br> <strong>2036 aluminum alloy</strong> features: high strength, a certain heat resistance, can be used for working parts below 150℃. <br> <strong>The strength of 2036 alloy</strong> is higher than that of 7075 alloy. <br>

1070 Aluminum pipe

1070 Aluminum pipe

<strong>1070 aluminum </strong> has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding. <br> <strong> Make use of its advantages </strong> to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts. <br>

1100 Aluminum pipe

1100 Aluminum pipe

<strong>1100 aluminum </strong>alloy is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment </strong>can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance<br> <strong>After anodic oxidation</strong> the corrosion resistance can be further improved and a beautiful surface can be obtained. <br>

1050 Aluminum pipe

1050 Aluminum pipe

<strong>1050 aluminum alloy</strong> is formed by adding a small amount of copper in pure aluminum.<br> <strong> It has excellent</strong> forming characteristics, high corrosion resistance, good weldability and electrical conductivity.<br> <strong> Widely</strong> used in products with low strength requirements<br>

5052 Aluminum pipe

5052 Aluminum pipe

<strong> 5052 aluminum</strong> is Al-Mg alloy aluminum, magnesium is the main alloy element in <br> <strong>5052 alloy aluminum</strong> is the most widely used one kind of rustproof aluminum, this alloy has high strength, especially the fatigue strength: High plasticity and corrosion resistance, heat treatment can not be strengthened, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability, poor cutting performance, polishing.

2024 Aluminum pipe

2024 Aluminum pipe

<strong>2024 aluminum alloy,</strong> the main alloying elements are copper and magnesium. <br> <strong>Applications</strong> where high strength but low weight ratio is required, and good fatigue strength. <br> <strong>Not weldable</strong> , general processing performance.<br> <strong> Because of poor </strong> corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.<br>

< 123 >

Copyright ©

Powered by 300.cn  |  SEO | Privacy Policy